Internal door "Object"

✔ 1-LEAF AND 2-LEAF
✔ THICK REBATE
✔ WITH TUBULAR CHIPBOARD INSERT
✔ ALSO WITH GLAZING

The door element „Teckentrup Object“ can be used DIN right or DIN left. The door leaf is made of hot-dip galvanized thin metal sheet, 40 mm thick, rebated on 3 sides. Tubular core bonded with the door shells over the entire surface. The frame is galvanized and prime coated with 3-sided seal. Tumbler lock (Bb)/profile cylinder lock and black round handle set „Teckentrup Object” or equivalent are standard.

Technical data

Product
Internal door "Teckentrup" Climate class III Stress group S(only 1-leaf)

Size range
Modular dimensions 1-leaf: Width: 625 – 1250 mm Height: 1875 – 2250 mm Modular dimensions 2-leaf: Width: 1500 – 2500 mm Height: 1875 – 2250 mm

Door leaf
• 40 mm thick, 3-side rebated made from hot-tip galvanised fine sheet • Tubular chipboard insert with door panels fully glued • Slave sash: Aluminium buffer profile with 2 flush-bolts

Surface
• Galvanised • Galvanised and primed (powdercoated) traffic white like RAL 9016) • Galvanised and powder-coated in the colours: Pure white, sepia brown, carmine red, moose green, reed green, dove blue • Galvanised and plastic-film-coated in the decorations: Oak bright, ash white, beech nature, oak classic and cherry

Glazing
• E6-anodised LM strips (nature anodised) • Wire ornamental glass up to 6 mm

Special equipment
• RAL of your choice • Round glazing • Door leaf without frame • Bathroom lock / toilet lock • Spyhole • Mail slot • Ventilation grille • Top door closer • Anti-panic lock • With slide threshold, frame with raised sill • Floor seal, retractable

Internal door "Teckentrup"

Internal door "Object"