MULTI-PURPOSE DOOR DW 42-1/2 "TECKENTRUP"

Door leaf, 42 mm thick and rebated on 3 sides. Active door leaf DIN right. Corner frame, 2.0 mm thick, with 3-sided seal. Flush mounted door leaf with less protruding hinges. Door leaf and frame galvanized and powder coated, similar to RAL 9002 (grey white). Active door leaf with mortice lock with latch lever in accordance with DIN 18250, prepared for profile cylinder.

1- and 2-leaf
Thin rebate
Optionally with glazing / upper casing
Heat insulation 1-leaf: U_D = 1,6 w/(m²k) / 1-leaf: U_D = 1,8 w/(m²k)

Request quote

Sound-insulated
EN ISO 10140/717-1
up to RW 37 dB*
Use in outdoor walls
CE labelling as per
EN 14351-1

^{* with supplementary equipment}

Technical data

Multi-purpose door dw 42-1 „Teckentrup“
Heat insulation as per EN ISO 12567-1: U_D= 1.6 W(m²K)

Multi-purpose door dw 42-2 „Teckentrup“
Heat insulation as per EN ISO 12567-1: U_D= 1.8 W(m²K)

Masonry
Concrete
Lightweight construction wall
Autoclaved aerated concrete wall

Modular dimension 1-leaf:

Width: 625 - 1250 mm
Height: 1750 - 2250 mm

Modular dimension 2-leaf:

Width: 1375 - 2500 mm
Height: 1750 - 2250 mm

Double-skinned
Thin rebated on three sides
Door leaf thickness: 42 mm
Sheet thickness: 1/1.5 mm
Insulation: Mineral wool
1 security bolt

Standard glazing: Wire reinforced glass with alu glazing strips
Special glazing: Rhombus-shaped glazing / round glazing (rubber clamp profile, steel/stainless steel ring) / cut-out of choice with light metal strips, max. glass pane size up to 1,5 m².
Glazing: VSG laminated safety glass / acrylic glass / ISO glass VSG/VSG/ ISO glass, wire reinforced/VSG

Corner frame, 2 mm thick, with 3-sided seal and bottom sill
Frame fastening with exposed masonry mounting

Special frame equipment: Counter frame, block frame or closed frame (Counter frame or closed frame required for installation in lightweight construction walls or autoclaved aerated concrete)

Door leaf and frame galvanised, powder-coated and primed; grey white like RAL 9002

Handle sets / Lever/Knob sets:(plastic, light metal, stainless steel, with short plate or rose escutcheon, with fixed outer knob
Prepared for rose escutcheon
Top door closer as per DIN EN 1154
Lock (panic locks)
Lock (Profil cylinder 30.5 + 30.5 mm)
Electric door openers
Spring hinge
Rectangular glazing (special size)
Round glazing max. Ø 600 mm with rubber clamping profile
Aluminium ventilation grille
Steel transformer grille
Upper casing / upper casing with glazing or transformer grille
Aluminium rain guard
RAL Colour optional