Attention to detail: Technology and security


When closed, vertical frame seals, top, intermediate and floor seals seal the door to all sides. Consequently, the garage is ideally protected from penetrating water and humidity. The 40 mm thick door leaf also guarantees ideal heat insulation and minimal energy loss. A Teckentrup sectional garage door is more than just a sectional garage door.

  • Extremely stable thanks to 40 mm sandwich design panels
  • Energy-saving heat insulation
  • Floor seal for ideal protection from humidity
  • Highly resistant PU hard foam permanently protects from corrosion
  • Maximum bending and torsional rigidity
  • Foam complies with standards for industrial doors
 

Thermal and rain protection

Once closed, the door is fully sealed between the header trim and the top door panel. Consequently, the garage is ideally protected from penetrating water and humidity. On the other hand, heat has no chance to dissipate.

Door runs smoothly/roller retainers

Eccentric roller brackets are made of abrasion-proof, special plastic. They guarantee maintenance-free functionality, simultaneously dampen running door rollers and in conjunction with the profiled spring channel they consequently contribute to smooth and barely audible door movements.

Finger pinch guard, inside/outside

Finger pinch guard does away with any dangerous slots between sections. Hinge flaps fully seal the centre hinges. In addition, a side guard prevents accidentally reaching into the gap between frame and guide rail.

 

Anti-corrosion protection/spacers

A special, concealed, plastic element separates the vertical frame sections from the floor. Be it after rainfall or in the event of slowly progressing humidity – the design makes sure the floor is permanently supplied with fresh air that dries quickly to provide permanent protection from corrosion.

Technology with profile/spring channel

The spring channel panels' special profiling in conjunction with special plastic sliders guarantee easy and smooth sectional door operation. The encapsulated spring channel design prevents penetrating dirt and additionally boosts durability levels.

Dual lock/multiple spring system

The multiple spring system ideally evens out the weight of the door in any situation. Dual retaining cables reliably support the door even if a cable or spring fractures. This consequently guarantees perfect sectional door operation: remains operational even in emergencies.

 

Reinforcement profile (omega profile)

We recommend using a reinforcement profile (omega profile) on the inside of the door to prevent a deflection of wider doors (from 4500 mm) as a result of direct sunlight.

Special console for sectional doors

The special console links the door leaf to the drive system to guarantee ideal tension and pressure distribution (in conjunction with 120 mm lintel). We recommend the insert for door widths from 4500 mm, for doors in dark colours or doors that are subject to long periods of direct sunlight as a result of their location.

Security photocells to boost safety

The door automatically stops once the optional photocells are unable to reflect the light from the opposite side. If the door is closed, transmitters and receivers are not visible and protected from damage. Photocells are also suitable for retrospective installation thanks to their simple clip installation.

Simply mounted quickly
Advantages of the CarTeck Frame 2.0

Save a lot of time during assembly with the CarTeck frame 2.0!

We are constantly developing our services and products and always base this on the wishes of our partners and customers. This results in direct advantages such as the significantly simplified assembly of the CarTeck frame - with much fewer individual parts and a great time saving.

 

Convenient attachment options

  • Faster and simplified installation of the mounting bracket: For smaller garages and a door panel weight of less than 70 kg the mounting bracket is omitted completely
  • For larger doors, up to 12 screw fittings or less are necessary: Simply insert the bracket into the frame, screw fittings are only necessary for the building structure
  • For interior and exterior installations, an offset of up to 12 mm is possible due to the new bracket

Easy spring tensioning

  • Attach the tensioning device in the multi-hole system of the vertical frame for counterweighting
  • No more time-consuming tensioning of the adjustment screws necessary in the future
  • Perfect selection of springs and cables
  • No protruding threaded rods

Less complex, easier installation

  • Less individual parts reduce the installation time
  • Installation instructions easy to understand
  • Individual solutions can be applied on-site
  • Long-lasting, not maintenance-intensive

Suitable style for the visible surface area

  • Visually disruptive punch holes omitted
  • In most cases, linings are not necessary for visual reasons

Also for garages with low insertion depths

  • Depending on the door dimensions and weight, a lower insertion depth of up to 450 mm is possible
  • No adjustment screws
  • Fewer suspension points

Secure and long-lasting spring system

  • The spring is better secured in the spring channel using a hook
  • Frame end cap better attached in spring channel
  • Optioanlly with spring channel cover secured by at least two brackets on every side
  • Optionally with the specially secured frame end cap clamps in the upper spring channel cover
 
Downloads

In the Teckentrup download center you will find current product information such as brochures, technical data sheets, approvals or installation instructions. Find the right information about the respective products quickly!