Outside fire-resistant steel door EI2 30-C5-Sa "Teckentrup 62"

 
 

✔ 1- AND 2-LEAF
✔ THIN REBATE

✔ FOR OUTSIDE USE
✔ OPTIONAL WITH STAINLESS STEEL
✔ CE LABEL ACC. TO EI2 CLASSIFICATION


EI2 30-C5-Sa "Teckentrup 62" tested as per EN 16034 / 14351-1. Single- or double-leaf door for outdoor use, with thickness of 62 mm. Thin rebate door with 3-sided seal and bottom sill. Leaf and frame galvanized and prime coated in grey white, similar to RAL 9002. 

 
Teckentrup Piktogramm_Brandschutz

Fire-resistant
as per EN 1634-1


Teckentrup Piktogramm_Einbruchhemmung

Burglary-resistant
as per EN 1627, 
RC2-RC4*


Atex

ATEX
Directive
2014/34 EU*


Teckentrup Piktogramm_Rauchdicht

Smoke-proof 
as per EN 1634-3


Druckbeständigkeit

Pressure resistance
as per EN 12210*


Teckentrup Piktogramm_Schalldämmung

Sound-insulated 
as per EN ISO 10140/
EN ISO 717-1 up to max. 
RW 42 dB*


 

* with supplementary equipment

Technical data 

Product

Fire-resistant steel door EI2 30-C5-Sa "Teckentrup 62"
tested in acc. with EN 16034 / 14351-1 for outside Installation.

Installation

• Masonry min. 115 mm
• Concrete min. 100 mm
• Autoclaved aerated concrete wall min. 115 mm
• Autoclaved aerated reinforced type min. 115 mm

Size range

Modular dimension 1-leaf (hatch):
Width:    500 - 1250 mm
Height:   500 - 1749 mm

Modular dimension 1-leaf:
Width:    625 - 1250 mm
Height: 1750 - 2500 mm*

Modular dimension 2-leaf:
Width:  1375 - 2500 mm
Height: 1750 - 2500 mm*

Height up to 3500 mm with upper casing.

Door leaf

• Double-skinned
• Thin rebate
• Door rebated on 3 sides
• Door leaf thickness: 62 mm
• Sheet thickness: 1 mm or 1.5 mm
• Security bolt: per leaf at least 3
• Flush door leaf without hinge stamping
• Door closer (hinge side)
• Bootom seal

Frame

• Corner frame, 1.5/2 mm thick with 3-sided seal
• Frame attached with exposed masonry installation

Special frame equipment: Counter frame, surrounding frame or block frame

Surface

• Door leaf and frame galvanised and powder coated,
   grey-white similar to RAL 9002
• Also in stainless steel

Glazing

• Fire resistant glass F30
• Glazing area angled with aluminium glass holding strips
• Max. pane size 904 x 2150 mm
• Round glasing steel glass holding, grey white like RAL 9002  

Special equipment

• Upper rain guard
• Bottom weather board
• Glazing (EI30)
• Electric strike
• Closing control
   (bolt contact) installed
• Opening detector
   (Reed contact) installed
• RAL of your choice
• Electromechanical blocking device
• and much more