Fire-resistant steel door/steel hatch T30-1/2-FSA "Teckentrup 62"

Fire-resistant steel door / steel hatch T30-1/2-FSA "Teckentrup 62"
Z-6.20-2037 tested in acc. with EN 1634-1 (DIN 4102)
for installation in internal walls 

• Masonry min. 115 mm
• Concrete min. 100 mm
• Lightweight construction stud wall* min. 88 mm*
• Autoclaved aerated concrete wall, min. 115 mm
• Covered steel- and Wood-beams F60

* min. ≥ F 30 as per DIN 4102-4 or in accordance with general building authority test certificate

Modular dimension 1-leaf:
Width:  500 - 1500 mm
Height: 500 - 4000 mm

Modular dimension 2-leaf:
Width:  1375 - 3000 mm
Height: 1750 - 4000 mm

With upper casing/top light up to 4600 mm

• Double-skinned
• Thin rebate
• Door rebated on 3 sides
• Hatch rebated on 4 sides
• Door leaf thickness: 62 mm
• Sheet thickness: 1 mm or 1.5 mm
• Security bolt: per leaf at least 1

• Corner frame, 1.5/2 mm thick with 3-sided seal
• Hatch frame, 1.5/2 mm thick with 4-sided seal
• Frame fastening with exposed masonry mounting

Special frame equipment: Counter frame, block frame or closed frame

Door leaf and frame galvanised, powder-
coated and primed; grey white like RAL 9002

• Fire resistant glass F30
• Glazing area angled with Aluminium glass holding strips
• Max. pane size 904 x 2150 mm
• Round glasing Ø300, Ø400 und Ø500 mm

• Prepared for rose escutcheon
• Top door closer as per DIN EN 1154
• Locks (panic locks)
• Electric door openers
• Lock Control (bolt contact) installed
• Revolving door drives
• Optionally with design profile FB